ATC SCM20ASL Active Stand-Mount Speakers
$14,495.00
Overview
150mm (6”) ATC 'super linear' mid/bass driver loaded in a compact sealed cabinet
25mm ATC 'S-spec' soft-dome dual-suspension HF driver
2 x Class A/B MOSFET amplifiers, 200W bass/mid & 50W high frequency
User adjustable input sensitivity & bass shelf controls
Balanced input & 2nd order Linkwitz-Riley active crossovers
Bookshelf or Stand-Mount
Grill included
6 year warranty
Currently, Oak and Walnut are stocked finishes, and other standard finishes are special-order.
In addition to the standard finishes, premium wood veneers and finishes are available on special order at extra cost. These include Burr Magnolia, Burr Poplar, European Walnut, Pippy Oak and Rosewood in a matt finish. There is an additional cost for a gloss finish to the wood veneer. Piano Black and Piano White in matt or gloss are also available on special order.
Interested but have questions? Call John on 0408 903 609
John is Australia’s longest-serving retailer of ATC Loudspeaker Technology, with a deep, specialist focus on the brand. At Sublime Hi-Fi, we exclusively offer ATC loudspeakers.
Quantity
Product specifications
Mid/Bass driver: 1 x 150mm/6", SB75-150SL 8Ω
High Frequency Driver: 1 x 25mm/1", SH25-76S 6Ω
Low Frequency Cut-off: 55Hz (-6dB, anechoic)
Mid/Bass driver: 1 x 150mm/6", SB75-150SL 8Ω
High Frequency Driver: 1 x 25mm/1", SH25-76S 6Ω
Low Frequency Cut-off: 55Hz (-6dB, anechoic)
High Frequency Cut-off: 25kHz (-6dB)
Matched Response: +/-0.5dB
Crossover Point: 2.2kHz
MaxSPL: 108dB continuous, 114dB peak (per pair, IEC Weighted Pink Noise, 1m, anechoic).
System Sensitivity: 85dBC SPL (@1m, pink noise, -18dBu, 1V input sens. 0dB bass boost).
Balanced Input: 1 x Rear Panel Mounted Female XLR, pin 2 hotInput Impedance: 20kΩ (differential)
Input CMRR: >60dB at (10kHz)
Input Sensitivity: 2.2dBu/1Vrms for full powerInput Sensitivity Control: -6dB switchable, -6dB variable. Total adjustment 2.2dBu/1Vrms to 14.2dBu/4Vrms
Bass Shelf: -2dB to +3dB, switchable in 1dB steps
Crossover Filters: 2nd Order Linkwitz Riley
Amplifier type: Grounded Source MOSFET, class A/B, convection cooled
Output Power: Bass 200W (8Ω), H.F. 50W (8Ω)
THD+N: <0.0017% /-95dB (1kHz, 1dB below rated power, 90kHz BW)
Frequency Response: <2Hz to>200kHz (-3dB)
Limiter: ATC Active FET Momentary Gain Reduction
Electronic amp protection: Amplifier d.c. offset and over-temperature (both indicated by rear panel LED)
Mains Input: 220-230V or 115V, factory set. Please observe panel markings and labels!
Power Consumption: Idle 26W/41VA. 1/8th Power 116W/116VA. Full Power 312W/398VA
Heat Output: Idle 89BTU/hr, 1/8th Power 311BTU/hr, Full Power 382BTU/hr
Net Weight: 24.3kgs/53.6lbs
Dimensions: HxWxD 450x250x411mm
Shipping Australia-wide
We can arrange shipping to any location within Australia.